产品分类

Dr. Scientist The Atmosphere reverb 混响 单块效果器

Atmosphere(大气)是一个紧凑的多模混响器,包含16个高质量的自定义数字信号处理器混响算法。其中包括很多经典的混响模式,如弹簧混响,大厅混响等;同时,加入了更多的实验声音,如反向,门控,移调和许多其他特效。Atmosphere的特点是配有1.8"的TFT彩色屏幕,提供了许多功能,如:参数预设,内部LFO系统,表达式/控制电压映射,MIDI等。和所有的Dr. Scientist踏板一样,Atmosphere可以和吉他、贝斯、合成器等许多其他乐器一起使用。

  • 型号: The Atmosphere
  • 价格:
  • 产地: 加拿大

Dr. Scientist The Atmosphere reverb 

混响 单块效果器


      Atmosphere(大气)是一个紧凑的多模混响器,包含16个高质量的自定义数字信号处理器混响算法。其中包括很多经典的混响模式,如弹簧混响,大厅混响等;同时,加入了更多的实验声音,如反向,门控,移调和许多其他特效。Atmosphere的特点是配有1.8"的TFT彩色屏幕,提供了许多功能,如:参数预设,内部LFO系统,表达式/控制电压映射,MIDI等。和所有的Dr. Scientist踏板一样,Atmosphere可以和吉他、贝斯、合成器等许多其他乐器一起使用。

图片关键词

特点:

  • 一个小盒子里有16个定制的数字效果

  • 16个参数预设

  • 对每个参数和预设值的完全MIDI控制

  • 大屏幕彩色显示屏,便于引导使用

  • 具有可分配按下和保持功能的多脚开关

  • 强大的内部LFO系统,8个波形和tap定速,可实现难以置信的调制

  • 扩展踏板/控制电压/内部LFO可映射到6个参数

  • 内部LFO与MIDI节拍时钟同步

  • 每个音色上的瞬时衰减

  • 高质量模拟信号通路

  • 优质零部件的选用

  • 可选择的真正旁路或带有软触摸继电器切换的路径旁路

  • 完全控制湿/干信号

  • 33.2kHz采样率下的24位A/D转换

  • 基于dsp的引擎的时钟转速/系统分辨率控制

  • 选择几种适合您个性的旁路屏幕显示

  • 顶部安装的音频和电源插口

  • 包括电源

  • 加拿大手工制作


操控:

  • RES – 控制从16khz到33.2khz的dsp引擎时钟速度/系统分辨率会影响采样率、延迟时间和影响率

  • MIX– 调整输入(干)和效果(湿)信号之间的平衡

  • VOL –调整输入(干)和效果(湿)信号之间的音量

  • TONE – 降低或提高效果(湿)信号的高频成分

  • DECAY – 控制混响淡出所需的时间(显示在屏幕上)

  • CTRL1 – 控制当前的参数1(显示在屏幕上)

  • CTRL2 – 控制当前的参数2(显示在屏幕上)

  • – Rotary Encoder: 旋转器:通过顺时针或逆时针旋转的选择循环,也用于浏览菜单

  • Button: 按钮:按下可在当前面片的默认值和预设值之间切换。按住可保存预设。双击进入菜单。按一次选择菜单中的选项

  • Multi – 按下和按住的多个可分配功能包括:下一个音色、上一个音色、预设/默认切换、无限衰减、轻触LFO的速度、LFO开/关、按住Stomp并双击音色按钮的无输入菜单

  • Bypass – 接通或断开效果,按住可在真正旁路和轨迹旁路之间切换


规格

  • 阻抗 Input/Output Impedance: 500kΩ/1kΩ

  • 供电:300mA @ 9VDC, 600mA @ 18V, 2.1mm centre negative plug

  • 直通旁通切换

  • 扩展接口:Expression Input: TRS cable, 10kΩ to 100kΩ resistance

  • MIDI 输入口 Input: 5针MIDI线

  • 控制电压输入:Control Voltage Input: TS cable, 0-5VDC

  • 采样率:24 Bit A/D Converters at 33.2kHz sample rate

  • 尺寸: 70mm 宽, 129mm 长, 59mm 高 (2.75”X 5.1”X 2.3”)


演示视频:

图片关键词

图片关键词

原文介绍:

The Atmosphere is a compact multi-mode Reverberator containing 16 high quality, custom DSP reverb algorithms. These include classic favourites like Spring, Hall, Plate, as well as more experimental sounds like Aether (reverse), Gated, Pitch, plus many others. The Atmosphere features a vibrant 1.8” TFT colour screen providing easy access to many in-depth functions like: On-board Presets, Internal LFO system, Expression/Control Voltage mapping, MIDI, and more. Like all Dr. Scientist pedals, the Atmosphere can be used with guitar, bass, synths, and many other instruments.

Features

  • 16 custom programmed digital effects in 1 small box

  • 16 On-board Presets

  • Full MIDI control over every parameter and access to presets

  • Large colour screen display for easy navigation

  • Multi Stomp Switch with assignable Press and Hold functions

  • Powerful internal LFO system with 8 waveforms and tap tempo for unbelievable modulations

  • Expression pedal/control voltage/Internal LFO can be mapped to 6 parameters

  • Internal LFO syncs to MIDI beat clock

  • Momentary infinite decay on every patch

  • High quality analog signal path

  • Premium parts and components throughout

  • Selectable True Bypass or Trails Bypass with soft touch relay switching

  • Full control over wet/dry mix

  • 24 Bit A/D conversion at 33.2kHz sample rate

  • Control over DSP Engine clock speed/system resolution

  • Choice of several bypass screen displays to suit your individuality

  • Top mounted audio and power jacks

  • Included power supply

  • Designed and handmade in B.C., Canada


Knobs

  • RES – Control over DSP Engine clock speed/system resolution from 16kHz to 33.2kHz Affects sample rate, delay times, and effect rates

  • MIX– Adjusts the balance between Input (Dry) and Effect (Wet) signals

  • VOL – Controls the Input (Dry) and Effect (Wet) signal levels

  • TONE – Cuts or Boosts the high frequency content of the Effect (Wet) signal

  • DECAY – Controls the time the reverb takes to fade out (Displayed on screen)

  • CTRL1 – Controls parameter 1 of the current patch (Displayed on screen)

  • CTRL2 – Controls parameter 2 of the current patch (Displayed on screen)

  • – Rotary Encoder: Cycles through patches with clockwise or counter-clockwise rotation, Also used to navigate through menus

  • Button: Press to toggle between Default and Preset of current patch. Hold to save a preset. Double click to enter menus. Press once to select options within menus

  • Multi – Assignable functions for press and hold include: Next Patch, Previous Patch, Preset/Default toggle, Infinite Decay, Tap Tempo for LFO, LFO On/Off, None Enter menu by holding stomp and double clicking PATCH button

  • Bypass – Engage or disengage the effect, hold to toggle between True Bypass and Trails Bypass

Operation

  • Input/Output Impedance: 500kΩ/1kΩ

  • 300mA @ 9VDC, 600mA @ 18V, 2.1mm centre negative plug

  • Selectable True Bypass or Trails Bypass with soft touch relay switching

  • Additional Specs

  • Mono input, Mono output, TRS Expression input/TS Control Voltage input

  • Tone Control: +/-12dB 2nd Order peaking filter centred at 3kHz

  • Expression Input: TRS cable, 10kΩ to 100kΩ resistance

  • MIDI Input: 5 Pin DIN cable

  • Control Voltage Input: TS cable, 0-5VDC

  • 24 Bit A/D Converters at 33.2kHz sample rate

  • Dimensions: 70mm wide, 129mm long, 59mm tall (2.75” wide, 5.1” long, 2.3” tall)